The hottest new quotation for Xuchang aerospace pa

2022-08-14
  • Detail

Xuchang aerospace parts processing new quotation "Luoyang Mingshang optoelectronic technology supply"

Xuchang aerospace parts processing new quotation, when processing key aero-engine parts, surface integrity is crucial. ISO s hole machining is one of the final processes, which makes reliability and safety very important for the delivery of high-quality parts. The following hole processing solutions provided by Sandvik croman can well meet the requirements of ISO s hole processing

(1) drilling holes with strict requirements. The size and position of the hole have a great influence on the second process, and the unique micro groove shape can meet this requirement

(2) high quality reaming. When reaming complex and exquisite aerospace parts, high tolerance requirements, aerospace parts processing, hole straightness and hole quality are essential elements

(3) safe tapping

(4) high accessibility boring

aerospace parts processing Luoyang Mingshang Optoelectronic Technology Co., Ltd. has been committed to the research, development and production of metal surface treatment technology for many years. It is mainly engaged in the research and processing of cathodic electrophoretic paint coating technology, aluminum alloy hard anodizing (dyeing black), * * * anodizing (dyeing), aluminum alloy (magnesium alloy) conductive oxidation, fine sand blasting of aluminum alloy and copper alloy, stainless steel passivation, color coding, color bands and other processes

In recent years, cathodic electrophoretic paint technology is widely used in the surface treatment of metal parts such as automobile, motorcycle accessories, daily hardware, tools, electronic components, medical devices, household appliances and so on. It is a new type of environmental protection and new process to replace painting, plastic spraying, paint baking, oxidation, blackening and electroplating. The coated products have reached the international environmental protection standards through the inspection of the authoritative agency SGS. Advantages of cathodic electrophoretic coating:

1 Compared with traditional solvent based coatings and other dipping and spraying water-based baking paints, cathodic electrophoretic coatings have unparalleled advantages: the priming process can be fully automated and suitable for large-scale production; Uniform film thickness can be obtained; Good permeability improves the corrosion resistance of the inner cavity of the workpiece, especially the corrosion resistance of the cathodic electrophoretic coating; High paint utilization rate; It is a low pollution coating with high safety; The film has good appearance and good flattening when drying

2. Compared with the anodic electrophoretic coating method, it has the following advantages: the coated material does not undergo anodic dissolution, which improves the adhesion and corrosion resistance between the film and the substrate; The paint base contains groups that prevent the corrosion of the substrate (such as nitrogen-containing groups), and its corrosion resistance and swimming penetration are higher than that of the anodic electrophoretic coating, so that the inner cavity and weld of the coating can be coated better

II. * * (ordinary) anodizing

aluminum parts treated by anodizing can not only improve the protection and decoration of products, but also effectively prevent corrosion of products, enhance wear resistance, insulation and other characteristics, and can be used as the bottom layer of painting and electroplating. As a new surface treatment process, anodizing has broad market prospects, and has been widely used in construction, automobile, aerospace and other fields

our processing scope mainly includes oxidation natural color, oxidation dyed black, oxidation dyed red, oxidation dyed green, oxidation dyed black, etc

III. hard anodizing

different from ordinary anodizing, the hard oxide film can be thicker, and the corrosion resistance, wear resistance, insulation and hardness are also greatly improved

we mainly process hard anodized natural color, hard oxide dyed black

IV. passivation, fine sand blasting (sand blowing), color coating

stainless steel passivation, aluminum alloy passivation, aluminum alloy conductive oxidation natural color, aluminum alloy conductive oxidation golden yellow, aluminum alloy fine sand blasting, copper alloy fine sand blasting and color coating/Ribbon processing of special parts are also our main business scope

electrophoretic paint, ordinary oxidation and hard oxidation are our three leading brands, which have always enjoyed a good reputation in the industry. In addition to supplying large enterprises such as Samsung, Huawei, Yituo and Luoyang Locomotive Factory, our products are also one of the more than a dozen outsourcing manufacturers designated and certified by AVIC Optoelectronic Technology Co., Ltd. (factory 158). We deliver high-quality products for military industrial enterprises such as military industry 158, 613 and 725. In recent years, we have also cooperated with Foxconn, giant and Pingdingshan HP industry and trade; Our workshops and processing links are equipped with professionals with more than three years of experience in the industry

over the years, we have adhered to the business philosophy of "survival by quality and development by reputation", and adhered to the development purpose of "professional casting quality, innovation and development, integrity and detail service, the source of enterprise life". Technically, it is required to keep improving, improve the surface quality of products, take honesty and trustworthiness as the foundation, and provide customers with surface treatment solutions and services with a short processing cycle

the low-end market of coatings needs planning and guidance in the future.

many domestic enterprises are full of China's low-end market of coatings. What is the phenomenon behind this competition? Is this competition beneficial to the development of the low-end market

analysts said that the low-end market of Chinese coatings has been oversaturated. If an industry planning is not carried out, a large number of small enterprises will be forced to go bankrupt in the future, or now, or be merged by other large enterprises. Because a market is limited, it is impossible to integrate too many enterprises. Then in this crowded situation, the enterprises with poor strength will certainly disappear in the market. Therefore, the oversaturated future is the result of the collapse of a large number of enterprises. In order to make efforts to change the current bad situation in the low-end market, although the above data is somewhat different from that of Sita production, we must rely on relevant departments to guide some weak small and medium-sized enterprises to carry out transformation and development or withdraw from the paint market and turn to other industries

the low-end market of coatings needs planning and guidance in the future.

price competition is a typical feature of China's low-end market. The lower the price, the greater the advantage in the low-end market. It can also be said that we are not comparing the quality and service of products, but the price of products. Low price excessive competition makes low-end coating enterprises gain less and less profits, so disorderly competition will eventually destroy enterprises in the low-end market. Finally, if there is a major crisis in the whole low-end market, it will give foreign enterprises a major opportunity. If foreign enterprises take the opportunity to acquire and swallow up China's small enterprises, and then carry out rectification or auction to make the new quotation of Xuchang aerospace parts processing in China's low-end market. The common metal surface treatment method in the industry

is to delay metal oxidation and rust, while taking into account the appearance, texture Function and other requirements, metal surface treatment plays a very key role. Next, let's take you to know several common surface treatment methods in our stamping hardware industry

first, mechanical surface treatment

common are polishing, sandblasting, shot blasting, wiredrawing, etching, etc. Mechanical surface treatment is mainly to improve the appearance and texture of products. For example, polishing is to polish the metal surface. After polishing stainless steel stamping hardware products, we can achieve the mirror effect. Sandblasting stamping hardware products have the effect of sanding

the quite common electrochemical surface treatment methods in stamping hardware industry are electroplating and electrophoresis. Electro hydraulic universal testing machine is operated by electromechanical driving hydraulic oil pump. Plating is the process of plating a thin layer of other metals or alloys on some metal surfaces by using the principle of electrolysis. Electrophoresis refers to the process that the charged coating ions move to the cathode under the action of voltage applied to the anode and cathode of the electrophoretic coating, and react with the alkaline generated on the cathode surface to form insoluble substances, which are deposited on the surface of the workpiece. All of them can enhance the corrosion resistance of the metal (the coating metal is mostly made of corrosion-resistant metal), increase the hardness, prevent abrasion, improve the conductivity, lubricity, heat resistance, and surface beauty

III. heat treatment

common heat treatment methods include hot galvanizing, blackening and paint baking, which all need to treat the metal surface at high temperature. Hot dip galvanizing is to coat a layer of zinc on the surface of metal, alloy or other materials in a high-temperature solution containing zinc ions for beauty and rust prevention. It is mainly engaged in the research and processing of cathodic electrophoretic paint coating technology, hard anodizing of aluminum alloy (dyed black), sulfuric acid anodizing (dyed), conductive oxidation of aluminum alloy (magnesium alloy), fine sand blasting of aluminum alloy and copper alloy, passivation of stainless steel, color coding, color bands and other processes

electrophoretic paint, ordinary oxidation and hard oxidation are our three leading brands, which have always enjoyed a good reputation in the industry. In addition to supplying large enterprises such as Samsung, Huawei, Yituo and Luoyang Locomotive Factory, our products are also one of the more than a dozen outsourcing manufacturers designated and certified by AVIC Optoelectronic Technology Co., Ltd. (factory 158). We deliver high-quality products for military industrial enterprises such as military industry 158, 613 and 725. In recent years, we have also cooperated with Foxconn, giant and Pingdingshan HP industry and trade; Our workshops and processing links are equipped with professionals with more than three years of experience in the industry

over the years, we have adhered to the business philosophy of "survival by quality and development by reputation", and adhered to the development purpose of "professional casting quality, innovation and development, integrity and detail service, the source of enterprise life". Technically, it is required to keep improving, improve the surface quality of products, take honesty and trustworthiness as the foundation, and provide customers with surface treatment solutions and services with a short processing cycle

Luoyang Mingshang Photoelectric Technology Co., Ltd. has been committed to the research, development and production of metal surface treatment technology for many years. Now it is mainly engaged in cathodic electrophoretic paint coating technology, fine sand blasting of aluminum alloy and copper alloy

the new quotation of Xuchang aerospace parts processing. Luoyang Mingshang Photoelectric Technology Co., Ltd. has been committed to the research and development and production of metal surface treatment technology for many years. It is mainly engaged in the research and processing of natural color conductive oxidation processing, cathodic electrophoretic paint coating technology, hard anodizing of aluminum alloy (dyed black), conductive oxidation of aluminum alloy (magnesium alloy), fine sand blasting of aluminum alloy and copper alloy, passivation of stainless steel, color coding, color bands and other processes

when machining Aeroengine Parts, surface integrity is very important. Usually, it is important when we do experiments. ISO s hole machining is one of the final processes, which makes reliability and safety very important for the delivery of high-quality parts

drill holes with strict requirements. The size and position of the hole have a great influence on the second process. The unique micro groove shape can meet this requirement

Luoyang Mingshang Optoelectronic Technology Co., Ltd. is a dynamic company with advanced development concepts and advanced management experience. It constantly improves itself, requires itself, innovates, and is always ready to meet more challenges in the process of development. It has gathered a large number of contacts and customer resources in machinery and industrial equipment in Luoyang City, Henan Province, and has also received a lot of good comments in the industry, These are the results of not working hard and making progress together. These evaluations are the best driving force for us and also promote us

Copyright © 2011 JIN SHI